Broce RCT350 Sweeper Parts

Keeping your Broce RCT350 in peak operating condition starts with the right parts and a solid maintenance routine. Ensure your broom sweeper stays in top shape with high-quality toggle assembly, air filters, water separators, and more. The RCT350 is a rugged, hydrostatically-driven sweeper equipped to handle heavy-duty cleanup with precision and reliability. Don’t forget to stay on top of your maintenance—secure the parts you need to keep your RCT350 running smoothly! Keep reading for a comprehensive maintenance guide for your machine.

Walk-Around Inspection

• Inspect for visible damage or hydraulic fluid leaks around the entire machine
• Check engine oil, coolant, and hydraulic fluid levels
• Ensure the chain guard, seat belt, and core cover are installed and in working condition
• Check lights, reverse alarm, windshield wipers, and safety decals
• Inspect tires for pressure, wear, and lug nut tightness
• Test brakes and verify steering and throttle are responsive

Daily Maintenance

• Visually inspect for fluid leaks and damage
• Check and refill all fluid levels: engine oil, radiator, and hydraulic reservoir
• Clean or inspect pre-cleaner bowl and air filter service indicator
• Verify function of lights, horn, and emergency switches
• Test brakes and confirm proper operation of water system if equipped

Every 50 Hours

• Replace hydraulic oil filter
• Inspect brake lines and hoses for wear or damage
• Inspect air cleaner components and clean as necessary

Every 100 Hours

• Check and top off gear oil in 2-speed gearbox and differential
• Lubricate tie rod ends, steering components, and driveshaft U-joints
• Inspect and repack axle bearings as needed

Every 250 Hours

• Replace engine oil and oil filter
• Lubricate core/brush bearing (if not sealed)
• Replace air cleaner service and safety elements
• Clean radiator and heat exchanger thoroughly

Every 500 Hours

• Replace hydraulic oil (if not yet changed)
• Lubricate all suspension pivot points
• Inspect and adjust core motor and drive alignment

Every 1000 Hours

• Replace gear oil in 2-speed gearbox and differential
• Inspect and replace hydraulic hoses showing wear
• Rebuild or replace brake master cylinder if required

Every 4000 Hours

• Perform full engine and drivetrain service
• Inspect and replace fan if blades show wear or erosion
• Check frame welds, gussets, and fasteners for stress or cracks
• Conduct complete hydraulic and core function inspection

As-Needed Maintenance

• Replace broom wafers and inspect core drive spline
• Adjust core float or down-pressure settings for sweeping conditions
• Lubricate drive shaft and bolster assemblies
• Replace water spray nozzles and filters if clogged

Final Maintenance Recommendations

Regular maintenance keeps your Broce RCT350 operating reliably and safely on the jobsite. For a full range of Broce parts, explore our extensive EquipmentShare parts catalog. If you can't find the part you need, reach out to our parts experts for a custom order.