Sany SY95C Compact Excavator Parts

Keeping your SANY SY95C in peak operating condition starts with the right parts and a solid maintenance routine. Ensure your excavator stays in top shape with high-quality pilot filters, oil filters, lamps and more. The SY95C is powered by a Yanmar 4TNV98C engine offering 70.6 hp at 2,200 rpm. With durable construction and advanced controls, the SY95C is built to handle tough jobs with ease. Don’t forget to stay on top of your maintenance—secure the parts you need to keep your SANY SY95C running smoothly!

Walk-Around Inspection

• Inspect work equipment, cylinders, arms, and hoses for cracks, wear, or looseness
• Remove debris from engine, battery, and radiator compartments
• Check for oil leaks around engine, hydraulic tank, and fittings
• Inspect undercarriage including sprockets, track tension, and rollers
• Ensure cab displays, mirrors, and gauges are clean and working

Daily Maintenance

• Check coolant, engine oil, and fuel levels
• Check hydraulic oil via the tank sight gauge
• Drain water and sediment from the fuel tank and water separator
• Inspect fuses, wiring, and seat belt condition
• Check horn, mirrors, controls, and display panel function

Every 50 Hours

• Lubricate boom, arm, and bucket pivot points
• Check coolant level and hydraulic hoses
• Inspect bucket teeth and cutting edges for wear

Every 250 Hours

• Change engine oil and replace oil filter
• Clean or replace air cleaner element
• Inspect and adjust A/C compressor belt tension
• Grease swing bearing and pivot pins

Every 500 Hours

• Replace fuel filter element
• Check final drive oil level and refill as needed
• Lubricate all equipment joints
• Clean radiator, condenser, and air filter fins

Every 1,000 Hours

• Replace hydraulic oil return filter element
• Check or replace fan belt
• Inspect and grease door locks, hinges, and slide rails
• Clean or replace hydraulic tank breather valve filter

Every 2,000 Hours

• Change final drive oil
• Replace hydraulic oil suction filter
• Check and adjust engine valve clearance
• Flush cooling system and replace coolant

Every 4,000 Hours

• Inspect water pump for signs of wear or damage
• Change hydraulic tank oil
• Conduct detailed inspection of alternator and starter motor

Every 6,000 Hours

• Replace hydraulic main pump oil
• Overhaul final drives and inspect gear wear
• Replace worn hoses and all critical hydraulic seals
• Test all electronic and hydraulic systems for faults

As-Needed Maintenance

• Replace damaged hoses, lines, or filters as needed
• Inspect and replace worn-out control switches or sensors
• Lubricate any dry joints and address excessive wear
• Top off all fluid levels as required between intervals

Final Maintenance Recommendations

Regular maintenance keeps your SANY SY95C operating safely and efficiently. For a full range of SANY parts, explore our extensive EquipmentShare parts catalog. If you can’t find the part you need, reach out to our parts experts for a custom order.