Takeuchi TB1140 Compact Hydraulic Excavator Parts

Keep your Takeuchi TB1140 Excavator in peak condition with high-quality replacement parts. Powered by an 83 hp Isuzu engine and dual 28.1 gpm hydraulic pumps, this excavator is built for tough jobs. We provide essential components like safety switches, o-rings, and hard parts, all crafted to meet the TB1140's exacting standards. Maintain optimal performance and stay on top of service needs with parts engineered for reliability and precision. Keep reading to see our comprehensive maintenance guide for your machine.

Walk-Around Inspection

Walking up to your machine first thing is a great time to perform a walk-around inspection.

• Open the engine hood and covers to check for combustible materials around the engine and battery and liquid leakage around the engine and hydraulic devices
• Inspect the exterior of the machine for any damaged components. A few components to keep an eye out for are the lights, attachments, hoses, bucket, bucket teeth, hook, slip stopper, hook mount, handrail, crawler, shoe slide, track roller, idler, canopy, and cab.
• While sitting in the operator's seat, make sure to check the windshield, seat, seat belt, monitor, instruments and switches for damage and address any damaged, dirty or worn parts before operating the machine

Daily Inspection

Manufacturers recommend a 10 hour inspection to check your machine daily, and a great time to do so is first thing in the morning.

• Make sure to check the coolant level in the reserve tank and refill if needed
• Pull out the dipstick and check your oil levels as well, making sure to wipe down the dipstick with a clean rag before replacing it
• Check the dust indicator by making sure the red piston is not sticking out of the dust indicator
• Inspect the water separator to see if the red indicator ring is floating to indicate that it needs to be cleaned after the water is drained
• Make sure to check if your fuel levels are low and add fuel to the fuel port while watching the sight gauge
• Inspect the hydraulic oil level using the sight gauge and remember that the level will fluctuate depending on the temperature, but replenish if necessary
• Lubricate grease nipples with a grease gun taking care to wipe off expelled grease

50 Hour Maintenance

Every 50 Hours

• Routine inspections every 50 hours help maintain machine reliability and efficiency:
• Inspect and adjust the crawler tension
• Drain the water from the fuel tank
• Inspect and replenish the battery fluid level

250 Hour Maintenance

For continued efficient performance, perform these tasks every 250 hours:

• Clean the air cleaner
• Inspect the slew motor gear oil
• Clean the cooler fins
• Inspect and adjust the V-belt
• Inspect and adjust the compressor belt (AC)
• Clean the air filters (AC)
• Clean the condenser (AC)
• Inspect the refrigerant (gas) level (AC)

1,000 Hour Maintenance

At the 1,000 hour mark, it’s essential to perform thorough maintenance to ensure your machine continues to operate at peak efficiency:

• Replace the hydraulic oil return filter
• Replace the pilot line filter
• Replace the slew motor gear oil
• Replace the travel motor gear oil
• Clean the engine cooling system
• Replace the air cleaner element
• Replace the air breather filter
• Inspect and adjust the engine valve clearance
• Inspect the engine compression pressure
• Inspect and clean the engine starter and the alternator

4,500 Hour Maintenance

To ensure long term reliability and performance, conduct these critical maintenance tasks every 4,500 hours:

• Inspect the turbocharger (blow wash as necessary)
• Inspect and clean the EGR valve
• Clean the EGR cooler
• Inspect and maintain the DPD or its related parts
• Inspect the engine controller (ECM)
• Inspect and clean the injector

When Required

Some maintenance tasks should be performed as needed, depending on the wear and condition of your equipment:

• Replace the bucket teeth and side cutters
• Replace the bucket
• Adjust the gap between the bucket and arm (if equipped)
• Inspect and replenish the windshield washer fluid
• Drain the water from the water separator
• Lubricate the levers and pedals
• Inspect the rubber crawlers
• Replace the rubber crawlers.

For a larger selection of Takeuchi products, check out our extensive Takeuchi parts catalog. Still can't find the part you need? Reach out to one of our parts experts to place a custom order.