<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>
Regular price
$95.19
Ask An Expert
A cable convertor control converts the rotary motion of a knob to a linear motion, to push or pull a control cable.
When installing a new convertor or control cable it is necessary to adjust the cable for proper operation of the controlled device. For a heater valve, it is best to adjust the cable to ensure the heater water control valve has 100% shut off, verified at the valve. Heater output will easily override air conditioner cooling capacity. Therefore, a valve that does not have 100% shut off will add heat to the system to some degree. To adjust the control, manually put the valve to 100% closed. Manually turn the converter to the 100% off position. Install the cable loosely in the clamps, making sure the valve remains 100% off. It is acceptable for the convertor to creep away from the full off position but the valve must remain 100% closed. Tighten the cable clamps on both ends of the cable.
- Part Number: RD-3-9137-0P
- Type: Convertor cable control
- Action: Push-Pull
- Cable Length: 21.875"
- Special attribute: Use with Red Dot R-9777 unit and Universal
- Special Attribute: Use with 71R4015 Knob
- Type Controls
- Vendor VMACSINC
- SKU RD-3-9137-0P
This is a Shopify Collective Product. Returns, refunds, restocking fees, and exchanges are set by the Collective Partner and are subject to change at any time. If you would like more information, please reach out to our team.