Keeping your Atlas Copco QAS 250 JD T4F in peak operating condition starts with the right parts and a solid maintenance routine. Ensure your generator stays in top shape with high-quality service kits, spin-on water separators, and more. The QAS 250 delivers up to 200 kW of prime power through a John Deere 6090HFG06 Tier 4 Final engine, equipped with SCR and DOC after treatment for cleaner operation. With its rugged build, multi-voltage outputs (480V, 240V, 208V 3-phase and 240V 1-phase), and integrated DSE7310 controller, this unit is ideal for high-demand construction and industrial power needs. Don’t forget to stay on top of your maintenance—secure the parts you need to keep your Atlas Copco QAS 250 running smoothly! Keep reading to see our comprehensive maintenance guide for your machine.
Walk-Around Inspection
- Check fuel, oil, coolant, and DEF fluid levels
- Inspect all hoses, belts, and connections for leaks, cracks, or wear
- Check air filter condition and vacuator valve for blockage
- Inspect tires (if trailer-mounted), trailer jack, brake lights, and reflectors
- Ensure battery connections are secure and corrosion-free
- Verify all covers, control panel doors, and exhaust components are intact
Daily Inspection
- Top off engine oil, coolant, fuel, and DEF as needed
- Drain water from fuel filter/water separator
- Empty any fluid buildup from the spillage-free containment basin
- Inspect display for warning/fault codes and DEF indicator lights
- Check trailer connections and safety chains if applicable
50 Hour Maintenance
- Grease trailer jack and inspect undercarriage components
- Torque wheel nuts and check brake system (if installed)
250 Hour Maintenance
- Change engine oil and oil filter
- Replace fuel pre-filter and fuel filter
- Inspect and adjust fan belt tension
- Check DEF pump operation and inspect filter
500 Hour Maintenance
- Replace air filter and safety cartridge
- Analyze coolant condition and clean radiator/intercooler fins
- Inspect starter, turbocharger, and water pump
1,000 Hour Maintenance
- Replace DEF pump filter and inspect SCR system
- Check crankcase ventilation and flex mounts
- Test alternator insulation resistance
2,000 Hour Maintenance
- Flush and replace coolant with PARCOOL EG
- Replace all rubber hoses and clamps if over 5 years old
6,000 Hour Maintenance
- Replace all wear parts per service kit
- Clean and inspect alternator windings
- Perform full SCR and DPF aftertreatment check
Final Maintenance Recommendations
Regular maintenance keeps your Atlas Copco QAS 250 JD T4F operating safely and efficiently. For a full range of Atlas Copco parts, explore our extensive EquipmentShare parts catalog. If you can’t find the part you need, reach out to our parts experts for a custom order.
OEM
OEM
OEM
OEM
OEM
Aftermarket
