Genie Z-60/37 FE Articulating Boom Lift Parts
SEARCH Genie Z-60/37 FE Articulating Boom Lift Parts
RESULT
-
Original price $8.48 - Original price $8.48Original price$8.48$8.48 - $8.48Current price $8.48Baldwin Oil Filter B161-S
BaldwinIn stockManufacturer: Baldwin Part Name: Oil Filter Part Number/MPN: B161-S
Original price $8.48 - Original price $8.48Original price$8.48$8.48 - $8.48Current price $8.48 -
Original price $64.07 - Original price $64.07Original price$64.07$64.07 - $64.07Current price $64.07Air Filter 46496
WixLow stockDescriptionThe Wix Air Filter 46496 prevents dust and other harmful particles from entering your engine which can create a number of problems. Dirt...
View full detailsOriginal price $64.07 - Original price $64.07Original price$64.07$64.07 - $64.07Current price $64.07
Keeping your Genie Z-60/37 FE in peak operating condition starts with the right parts and a solid maintenance routine. Ensure your hybrid boom lift stays in top shape with high-quality oil filters, air filters, and more. Designed for efficient performance in both all-electric and hybrid modes, the Z-60/37 FE is built to handle demanding job sites while reducing fuel use and emissions. Don’t forget to stay on top of your maintenance—secure the parts you need to keep your Genie Z-60/37 FE running smoothly!
Walk-Around Inspection
- Inspect for oil, hydraulic, coolant, or battery leaks
- Check tire condition, lug nut torque, and tread wear
- Verify decals, platform gates, mid-rails, and lanyard anchors are intact and legible
- Ensure proper battery cable connections and corrosion-free terminals
- Inspect hoses, cables, cylinders, and drive hubs for visible wear or damage
- Check platform controls, emergency stops, alarms, and display screen functionality
Daily Maintenance
- Check engine oil, coolant, and hydraulic fluid levels
- Inspect batteries for fluid level and proper charge status
- Clean air vents, radiator fins, and battery pack compartments
- Test emergency stop buttons, tilt sensor, horn, and descent alarm
- Ensure charger indicators display correct charge status (green for full)
Every 250 Hours
- Change engine oil and oil filter (FE model only)
- Inspect hydraulic hoses and cylinders for leaks
- Check function of tilt sensor and drive enable interlock
Every 500 Hours
- Replace air filter and battery charger filters (if applicable)
- Flush coolant and inspect for discoloration or loss of protection
- Replace hydraulic return filter if recommended by condition
Every 1,000 Hours
- Drain and refill hydraulic oil
- Check torque on platform bolts, drive hub bolts, and structural fasteners
- Test motor brush wear if equipped with DC drive motors
Annual Maintenance
- Check battery charger function and cable insulation integrity
- Grease pivot points, turntable bearings, and platform rotator as required
- Replace any cracked decals, worn padding, or safety labels
As-Needed Maintenance
- Top off battery water only after charging is complete (flooded lead-acid only)
- Replace worn platform control switches or malfunctioning foot pedal
- Run engine-powered recharge weekly if hybrid mode is not used regularly
- Clear any error codes shown on the platform display via diagnostic reset
Final Maintenance Recommendations
Regular maintenance keeps your Genie Z-60/37 FE operating safely and efficiently. For a full range of Genie parts, explore our extensive EquipmentShare parts catalog. If you can’t find the part you need, reach out to our parts experts for a custom order.
