Discover top-quality Takeuchi TB2150 parts at EquipmentShare Parts. Our extensive selection includes genuine and aftermarket components like o-rings, and hard parts, all crafted to keep your excavator running smoothly. The TB2150’s turbocharged Deutz engine delivers 114 horsepower, while its hydraulic system boasts a total flow of 78.9 gallons per minute, ensuring powerful performance on the job. With competitive pricing, fast shipping, and expert support, maintaining your machine is simple. Don’t forget to keep up on your Takeuchi service intervals—order your parts today! Keep reading to see our comprehensive maintenance guide for your machine.

Walk-Around Inspection

Walking up to your machine first thing is a great time to perform a walk-around inspection.

• Open the engine hood and covers to check for combustible materials around the engine and battery and liquid leakage around the engine and hydraulic devices.
• Inspect the exterior of the machine for any damaged components. A few components to keep an eye out for are the lights, attachments, hoses, bucket, bucket teeth, hook, slip stopper, hook mount, handrail, crawler, shoe slide, track roller, idler, canopy, and cab.
• While sitting in the operator's seat, make sure to check the windshield, seat, seat belt, monitor, instruments and switches for damage and address any damaged, dirty or worn parts before operating the machine.

Daily Inspection

Manufacturers recommend a 10 hour inspection to check your machine daily, and a great time to do so is first thing in the morning.

• Make sure to check the coolant level in the reserve tank and refill if needed.
• Pull out the dipstick and check your oil levels as well, making sure to wipe down the dipstick with a clean rag before replacing it.
• Check the dust indicator by making sure the red piston is not sticking out of the dust indicator.
• Inspect the water separator to see if the red indicator ring is floating to indicate that it needs to be cleaned after the water is drained.
• Make sure to check if your fuel levels are low and add fuel to the fuel port while watching the sight gauge.
• Inspect the hydraulic oil level using the sight gauge and remember that the level will fluctuate depending on the temperature, but replenish if necessary.
• Lubricate grease nipples with a grease gun taking care to wipe off expelled grease.

50 Hour Maintenance

Regular maintenance every 50 hours is essential to keep your machine operating efficiently:

• Replace the hydraulic oil return filter.
• Change the engine oil and oil filter
• Inspect and adjust the fan belt
• Inspect the crawler tension
• Lubricate the slew bearing
• Inspect and replenish the battery fluid level.
• Drain the fuel tank.

250 Hour Maintenance

Routine maintenance every 250 hours helps sustain equipment efficiency:

• Inspect the slew motor gear oil.
• Clean the cooler fins.
• Inspect and adjust the compressor belt (AC).
• Clean the air filters (AC).
• Clean the condenser (AC).
• Inspect the refrigerant (gas) level (AC).

500 Hour Maintenance

Deep cleaning and inspection are required every 500 hours:

• Recommended service kit: Takeuchi TB2150 500 Hour Service Kit
• Lubricate the slew bearing.
• Replace the engine oil and oil filter.

1,000 Hour Maintenance

At this milestone, perform comprehensive checks and replacements:

• Recommended service kit: Takeuchi TB2150 Annual Service Kit
• Replace the hydraulic oil return filter.
• Replace the pilot line filter.
• Replace the slew motor gear oil.
• Replace the travel motor gear oil.
• Clean the engine cooling system.
• Replace the air cleaner element.
• Replace the air breather filter.
• Replace the fuel filters.
• Inspect and adjust the V-rib belt.
• Inspect the engine installation condition.
• Inspect the low temperature starting device.

3,000 Hour Maintenance

Every 3,000 Hours:

• Replace the V-rib belt.

4,000 Hour Maintenance

Every 4,000 hours:

• Replace the hydraulic oil and clean the suction strainer.

For a larger selection of Takeuchi products, check out our extensive Takeuchi parts catalog. Still can't find the part you need? Reach out to one of our parts experts to place a custom order.