Keeping your JCB S3246E in peak operating condition starts with the right parts and a solid maintenance routine. Ensure your electric scissor lift stays in top shape with high-quality manuals and more. The JCB S3246E provides a platform height of up to 9.68 meters and is designed for safe, reliable access in indoor and flat-surfaced outdoor environments. Don’t forget to stay on top of your maintenance—secure the parts you need to keep your S3246E running smoothly! Keep reading for a comprehensive maintenance guide for your machine.

Walk-Around Inspection

• Inspect machine for visible damage, fluid leaks, or missing fasteners
• Ensure scissor arms, platform, guardrails, and decals are in place and undamaged
• Check wheels and tires for wear or embedded debris
• Inspect batteries, cables, and terminals for cleanliness and proper connections
• Verify safety devices including emergency stop and safety strut are in proper condition

Daily Maintenance

• Check hydraulic oil, battery electrolyte, and brake fluid levels
• Clean air vents and screens around motors, fans, and radiators
• Grease lift rams, steer pivots, and platform sliders
• Test horn, alarms, joystick, platform lift/lower, and drive controls
• Inspect tilt sensor and pothole protection system for correct function

Every 50 Hours

• Clean battery terminals and check charger operation
• Inspect electrical cables for wear, corrosion, or loose connections

Every 250 Hours

• Change engine oil and oil filter
• Replace hydraulic return filter
• Inspect tilt sensor and pothole guards
• Check all structural welds and pivot pins

Every 500 Hours

• Replace hydraulic fluid and vent filter
• Inspect platform extension mechanism
• Lubricate scissor pins and bushings

Every 1000 Hours

• Replace primary and secondary air filters
• Inspect steering system, service brake, and parking brake
• Check hydraulic pressures and test the overload system

Every 2000 Hours

• Replace all hydraulic hoses if worn or damaged
• Inspect chassis wiring harness and relay box
• Perform full load test on platform and brakes

Every 4000 Hours

• Replace brake master cylinder internals
• Replace all brake hoses and check valves
• Flush and refill hydraulic system

As-Needed Maintenance

• Replace worn decals or faded safety labels
• Repair or replace damaged guardrails or step ladders
• Top off washer fluid and inspect nozzle function
• Check fuse panel and relay operation if electrical faults occur

Final Maintenance Recommendations

Regular maintenance keeps your JCB S3246E operating reliably and safely on the jobsite. For a full range of JCB parts, explore our extensive EquipmentShare parts catalog. If you can't find the part you need, reach out to our parts experts for a custom order.