JLG 3248RS Electric Scissor Lift Parts
SEARCH JLG 3248RS Electric Scissor Lift Parts
Close
Refine By
$
-
$
6
9
13
17
21
RESULT
- $20.62
JLG Push Button Switch 4360387
JLGDescription The JLG Switch 4360387 is a must-have for your machine. Its weight is 0.1 lbs. It is constructed with robust materials to provide a long-lasting and durable performance. - $5.60
Genie Pin, Wire, Lock 3/8 X 2 - 1/2, Zag 1259182GT
GenieDescription The Genie Pin 1259182GT is an ideal selection for securing objects together during construction projects. Its weight is 0.2 lbs. Its heavy-duty construction ensures it will stand up to wear and tear. With this pin, you can be sure that your construction projects will be secure and kept safe.
Can't find the part you're looking for?
Can't find the part you're looking for?
CALL US: 573-355-6493
EMAIL US: shop@equipmentshare.com
Can't find the part you're looking for?
Keeping your JLG 3248RS in peak operating condition starts with the right parts and a solid maintenance routine. Ensure your scissor lift stays in top shape with high-quality push button switches, pins and more. The 3248RS offers 32 ft of lift height with electric drive and zero emissions, perfect for indoor or outdoor job sites where maneuverability and reach matter. Don’t forget to stay on top of your maintenance—secure the parts you need to keep your JLG 3248RS running smoothly!
Walk-Around Inspection
- Inspect hydraulic hoses, cylinders, and scissor arms for leaks or damage
- Check battery compartment for secure terminals and clean fluid level indicators
- Verify platform railings, gates, and lanyard anchor points are intact
- Inspect tires and wheels for damage, proper lug nut torque, and inflation
- Confirm all decals and placards are legible and securely attached
- Check for frame damage and ensure pothole protection devices are in place
Daily Maintenance
- Check hydraulic oil level at the reservoir
- Inspect battery charge level and water level (for wet-cell batteries)
- Check for oil leaks or fluid buildup under the machine
- Test horn, tilt alarm, lights, and emergency stop switches
- Clean platform floor and remove any slippery substances or debris
Every 50 Hours
- Grease all pivot pins, including lift and steer cylinders
- Inspect V-belts and drive components for wear or tension loss
- Check battery condition and apply terminal corrosion protection
Every 250 Hours
- Change axle and wheel end oil
- Inspect lift chains and wear pads
- Lubricate all sliding components and safety linkages
Every 500 Hours
- Replace hydraulic return filter and tank breather
- Replace fuel filters and inspect the charger for battery condition
- Check and tighten platform rail bolts and gate latches
Every 1,000 Hours
- Flush and refill the hydraulic reservoir with approved fluid
- Inspect and torque all critical bolts and wheel fasteners
- Check all platform control functions and calibration settings
Annual Maintenance
- Flush and replace coolant (if applicable for hybrid models)
- Perform complete functional check and fault code diagnostics
- Inspect structural welds, boom support components, and decals
As-Needed Maintenance
- Replace damaged hoses, fittings, platform parts, or decals
- Recharge or replace batteries if performance drops
- Clean or replace clogged air filters and troubleshoot any DTC alerts
- Check manual descent control and ensure it functions properly
Final Maintenance Recommendations
Regular maintenance keeps your JLG 3248RS operating safely and efficiently. For a full range of JLG parts, explore our extensive EquipmentShare parts catalog. If you can’t find the part you need, reach out to our parts experts for a custom order.
Popular Models

Sany SY215C Excavator Parts

Sany SY135C Compact Excavator Parts

Takeuchi TL8R2 Compact Track Loader Parts

Takeuchi TL12R2 Compact Track Loader Parts

Genie GS-1930 Electric Scissor Lift Parts

Genie GS-2632 Electric Scissor Lift Parts

Skyjack SJIII 3219 Electric Scissor Lift Parts

MEC Micro 19 Electric Scissor Lift Parts

Genie GTH-5519 Telehandler Parts
